Sulphomor is a Sulphur based mortar containing Plasticizer & filter. Hot melt type acid-proof cement oppose oxidizing and non-oxidizing chemicals up to certain limits. Best jointing cement for acid proof Brick / Tile lining work in battery charging rooms & electro plating plants. It resists Temperature up to 90 °C. The melt mortar is tremendously fluid and pours quite easily.
Sulphur Cement has a very good acids, Alkalics (minute condition) and water resisting properties. It is mainly used as a joint for Brick lining, drainage channels and tank lining where bricks are bedded in other cement.
Sulphur Cement is expansively used in Industries mainly jointing of Acid Proof Brick / Tiles in lining of Pickling Tanks, Storage tanks, Sumps, Drainage Line, Floor and Sewerage line pipe joints.
Sulphur ingots are broken and are placed in an appropriate clean, dry Kettle. It is melted over low heat by stirring with metal rod or ladle. If sulphur is overheated or ignited a tight cover or wet gunny bags shall be kept ready for use in case of fire. Sulphur mortar burns with a low blue flame. If this should happen heating should be stopped and the vessel should be enclosed with the lid or wet gunny bags until the fire are extinguished. If the mortar thickens on overheating, it should be allowed to cool and stirred until thin. Care shall be taken that water or damp Mortar does not fall or mixed in the heating vessel so as to avoid foaming.
Sulphomor is a Sulphur based mortar containing Plasticizer & filter. Hot melt type acid-proof cement oppose oxidizing and non-oxidizing chemicals up to certain limits. Best jointing cement for acid proof Brick / Tile lining work in battery charging rooms & electro plating plants. It resists Temperature up to 90 °C. The melt mortar is tremendously fluid and pours quite easily.
